Crown thinning is a pruning technique used to improve the structure and health of a tree by selectively removing branches from the crown. Its not about reducing the overall size of the tree, like crown reduction, but rather about increasing light penetration and air circulation within the canopy. This helps reduce wind resistance, lessening the chance of storm damage, and can also improve the trees aesthetic appeal by creating a more balanced and open shape.
Effective crown thinning relies on several best practices. First and foremost, proper branch selection is crucial. The goal is to remove smaller, weaker branches, often those growing towards the inside of the crown or crossing over other branches. Ideally, you want to maintain the trees natural shape, avoiding the creation of large gaps or a "lions tail" effect where only terminal foliage remains at the ends of branches. Removing no more than 20-25% of the live crown in a single pruning session is another important guideline. Over-thinning stresses the tree, making it susceptible to disease and pests.
The actual cuts themselves require precision. Branches should be removed at their point of origin, or back to a larger lateral branch, avoiding flush cuts against the trunk or parent branch. These flush cuts create larger wounds that heal slowly, increasing the risk of decay. Using sharp, clean pruning tools is essential to minimize damage and promote quicker healing. Finally, timing is key. While light thinning can be done almost any time of year, more extensive work is best performed during the dormant season when the tree is less vulnerable to stress and disease.
By adhering to these best practices, crown thinning can enhance the health, longevity, and beauty of your trees while mitigating potential hazards. However, its a skilled practice, and for larger or more complex trees, consulting a certified arborist is always recommended. They have the knowledge and experience to assess the trees specific needs and ensure proper pruning techniques are employed.
Crown thinning is a pruning technique used to improve a trees structure, light penetration, and air circulation. Choosing the right equipment is crucial for efficient and safe crown thinning. While the specific tools might vary based on the size of the branches being removed, a few key pieces are essential for any crown thinner.
For smaller branches, hand pruners and loppers are the go-to tools. Hand pruners are ideal for branches up to about an inch in diameter, providing a clean, precise cut. Loppers, with their longer handles, offer increased leverage for branches up to about two inches thick. Bypass pruners and loppers, which cut like scissors, are generally preferred for live branches, as they create a cleaner cut that heals more readily.
When dealing with larger branches, a pruning saw becomes necessary. Folding saws are portable and versatile, making them a good choice for smaller trees or branches that are easily accessible. Fixed-blade saws, on the other hand, offer more aggressive cutting power for thicker limbs. Pole saws extend your reach, allowing you to prune higher branches without needing a ladder, though they can be more challenging to control precisely. For very large branches, a chainsaw might be required, but this should only be used by experienced operators with proper safety training and equipment.
Safety equipment is just as important as the cutting tools themselves. Gloves protect your hands from cuts and splinters, while safety glasses shield your eyes from flying debris. A helmet is essential when working with larger trees or elevated branches. When using a chainsaw, chaps and hearing protection are also crucial.
Finally, proper rope and harness systems are vital for climbing and working in trees, especially for larger thinning projects. These allow for safe maneuvering and controlled descents, preventing falls and injuries. Working at height can be extremely dangerous, and proper training in rope techniques is essential.
Choosing the right equipment for crown thinning is an important part of the process. By selecting the appropriate tools for the job and prioritizing safety, you can ensure efficient and effective crown thinning, contributing to the overall health and longevity of your trees.
Crown thinning is a common tree pruning practice that enhances light penetration and air circulation within the crown. While beneficial for tree health and aesthetics, its crucial to prioritize safety, as it involves working at height with sharp tools. Neglecting safety precautions can lead to serious injuries for both the arborist and anyone nearby.
A fundamental safety measure is a comprehensive risk assessment before starting any work. This involves evaluating the trees condition, identifying potential hazards like dead branches or nearby power lines, and planning the work sequence accordingly. Wearing appropriate personal protective equipment (PPE) is non-negotiable. This includes a helmet, eye protection, hearing protection (especially when using chainsaws), cut-resistant gloves, and sturdy, non-slip footwear. Harnessing and safe climbing techniques are essential when working aloft. Ropes, carabiners, and other climbing gear should be inspected regularly and used correctly. A thorough understanding of proper climbing techniques and aerial rescue procedures is paramount.
Ground workers also need to be vigilant. Establishing a clear drop zone and ensuring everyone in the vicinity is aware of the ongoing operations is crucial. Communication between the climber and ground crew is vital throughout the process. Clear signals and agreed-upon protocols help prevent misunderstandings and ensure everyones safety. Proper tool maintenance is another critical aspect. Chainsaws should be sharp, well-lubricated, and equipped with functioning safety features. Cutting tools like hand saws and loppers should also be kept sharp and in good condition.
Finally, weather conditions play a significant role. Avoid crown thinning during high winds, heavy rain, or lightning storms. Wet conditions can make branches slippery and increase the risk of falls. By adhering to these safety precautions, arborists can effectively perform crown thinning operations while minimizing the risk of accidents and ensuring the well-being of themselves and others.
Deciding whether crown thinning is the right approach for your trees can feel overwhelming. It’s one of many pruning methods, each with its own purpose, and choosing the wrong one can harm the trees health and appearance. So, when is crown thinning the best option?
Crown thinning is like strategically removing clutter from a room. It selectively removes branches throughout the crown to reduce density, allowing more light and air circulation. This is different from topping, which indiscriminately hacks off the top of the tree, leading to weak regrowth and a butchered look. Its also distinct from crown raising, which removes lower branches to increase clearance, or crown reduction, which shortens specific branches to decrease the trees overall size.
Consider crown thinning when your trees canopy is excessively dense, hindering sunlight from reaching inner branches or the ground below. This dense shade can weaken the tree, making it more susceptible to disease and pests. Improved air circulation achieved through thinning can also help prevent fungal issues. If you notice a significant decrease in flowering or fruiting, a too-dense crown could be the culprit, and thinning can help revitalize production.
However, crown thinning isnt always the answer. If you simply want to raise the canopy for more clearance, crown raising is a better choice. If the tree is encroaching on power lines or your house, crown reduction might be necessary. And if the tree is simply too large for its space, removal might be the only viable option. Over-thinning can also be detrimental, weakening the tree and making it vulnerable to sunscald.
Ultimately, the decision of when to employ crown thinning requires careful observation and, ideally, consultation with a certified arborist. They can assess your trees specific needs, taking into account its species, health, and location, and recommend the most appropriate pruning method to ensure its long-term health and beauty. Remember, proper pruning is an investment in your trees future.
An arborist, or (less commonly) arboriculturist, is a professional in the practice of arboriculture, which is the cultivation, management, and study of individual trees, shrubs, vines, and other perennial woody plants in dendrology and horticulture.[citation needed]
Arborists generally focus on the health and safety of individual plants and trees, rather than managing forests or harvesting wood (silviculture or forestry). An arborist's scope of work is therefore distinct from that of either a forester or a logger.[citation needed]
In order for arborists to work near power wires, either additional training is required or they need to be certified as a Qualified Line Clearance Arborist or Utility Arborist (there may be different terminology for various countries). There is a variety of minimum distances that must be kept from power wires depending on voltage, however the common distance for low voltage lines in urban settings is 10 feet (about 3 metres).[1]
Arborists who climb (as not all do) can use a variety of techniques to ascend into the tree. The least invasive, and most popular technique used is to ascend on rope. There are two common methods of climbing, Stationary Rope System (SRS) and Moving Rope System (MRS). When personal safety is an issue, or the tree is being removed, arborists may use 'spikes', (also known as 'gaffs' or 'spurs') attached to their chainsaw boots with straps to ascend and work. Spikes wound the tree, leaving small holes where each step has been.[citation needed]
An arborist's work may involve very large and complex trees, or ecological communities and their abiotic components in the context of the landscape ecosystem. These may require monitoring and treatment to ensure they are healthy, safe, and suitable to property owners or community standards. This work may include some or all of the following: planting; transplanting; pruning; structural support; preventing, or diagnosing and treating phytopathology or parasitism; preventing or interrupting grazing or predation; installing lightning protection; and removing vegetation deemed as hazardous, an invasive species, a disease vector, or a weed.[citation needed]
Arborists may also plan, consult, write reports and give legal testimony. While some aspects of this work are done on the ground or in an office, much of it is done by arborists who perform tree services and who climb the trees with ropes, harnesses and other equipment. Lifts and cranes may be used too. The work of all arborists is not the same. Some may just provide a consulting service; others may perform climbing, pruning and planting: whilst others may provide a combination of all of these services.[2]
Arborists gain qualifications to practice arboriculture in a variety of ways and some arborists are more qualified than others. Experience working safely and effectively in and around trees is essential. Arborists tend to specialize in one or more disciplines of arboriculture, such as diagnosis and treatment of pests, diseases and nutritional deficiencies in trees, climbing and pruning, cabling and lightning protection, or consultation and report writing. All these disciplines are related to one another and some arborists are very well experienced in all areas of tree work, however not all arborists have the training or experience to properly practice every discipline.[citation needed]
Arborists choose to pursue formal certification, which is available in some countries and varies somewhat by location. An arborist who holds certification in one or more disciplines may be expected to participate in rigorous continuing education requirements to ensure constant improvement of skills and techniques.[citation needed]
In Australia, arboricultural education and training are streamlined countrywide through a multi-disciplinary vocational education, training, and qualification authority called the Australian Qualifications Framework, which offers varying levels of professional qualification. Government institutions including Technical and Further Education (TAFE) offer Certificate III or a diploma in arboriculture as well as some universities.[3][4] There are also many private institutions covering similar educational framework in each state. Recognition of prior learning is also an option for practicing arborists with 10 or more years of experience with no prior formal training. It allows them to be assessed and fast track their certification.[citation needed]
In France, a qualified arborist must hold a Management of Ornamental Trees certificate, and a qualified arborist climber must hold a Pruning and Care of Trees certificate; both delivered by the French Ministry of Agriculture.[5][6]
In the UK, an arborist can gain qualifications up to and including a master's degree. College-based courses include further education qualifications, such as national certificate, national diploma, while higher education courses in arboriculture include foundation degree, bachelor's degree and master's degree.[citation needed]
In the US, a Certified Arborist (CA) is a professional who has over three years of documented and verified experience and has passed a rigorous written test from the International Society of Arboriculture. Other designations include Municipal Specialist, Utility Specialist and Board Certified Master Arborist (BCMA). The USA and Canada additionally have college-based training which, if passed, will give the certificate of Qualified Arborist. The Qualified Arborist can then be used to offset partial experience towards the Certified Arborist.
Tree Risk Assessment Qualified credential (TRAQ), designed by the International Society of Arboriculture, was launched in 2013. At that time people holding the TRACE credential were transferred over to the TRAQ credential.[citation needed]
In Canada, there are provincially governed apprenticeship programs that allow arborists' to work near power lines upon completion. These apprenticeship programs must meet the provincial reregulations (For example, in B.C. they must meet WorkSafeBC G19.30), and individuals must ensure they meet the requirements of the owner of the power system.[citation needed]
Trees in urban landscape settings are often subject to disturbances, whether human or natural, both above and below ground. They may require care to improve their chances of survival following damage from either biotic or abiotic causes. Arborists can provide appropriate solutions, such as pruning trees for health and good structure, for aesthetic reasons, and to permit people to walk under them (a technique often referred to as "crown raising"), or to keep them away from wires, fences, and buildings (a technique referred to as "crown reduction").[7] Timing and methods of treatment depend on the species of tree and the purpose of the work. To determine the best practices, a thorough knowledge of local species and environments is essential.[citation needed]
There can be a vast difference between the techniques and practices of professional arborists and those of inadequately trained tree workers. Some commonly offered "services" are considered unacceptable by modern arboricultural standards and may seriously damage, disfigure, weaken, or even kill trees. One such example is tree topping, lopping, or "hat-racking", where entire tops of trees or main stems are removed, generally by cross-cutting the main stem(s) or leaders, leaving large unsightly stubs. Trees that manage to survive such treatment are left prone to a spectrum of detrimental effects, including vigorous but weakly attached regrowth, pest susceptibility, pathogen intrusion, and internal decay.[8]
Pruning should only be done with a specific purpose in mind. Every cut is a wound, and every leaf lost is removal of photosynthetic potential. Proper pruning can be helpful in many ways, but should always be done with the minimum amount of live tissue removed.[9]
In recent years, research has proven that wound dressings such as paint, tar, or other coverings are unnecessary and may harm trees. The coverings may encourage growth of decay-causing fungi. Proper pruning, by cutting through branches at the right location, can do more to limit decay than wound dressing [10]
Chemicals can be applied to trees for insect or disease control through soil application, stem injections, or spraying. Compacted or disturbed soils can be improved in various ways.[citation needed]
Arborists can also assess trees to determine the health, structure, safety, or feasibility within a landscape and in proximity to humans. Modern arboriculture has progressed in technology and sophistication from practices of the past. Many current practices are based on knowledge gained through recent research, including that of Alex Shigo, considered one "father" of modern arboriculture.[11]
Depending on the jurisdiction, there may be a number of legal issues surrounding the practices of arborists, including boundary issues, public safety issues, "heritage" trees of community value, and "neighbour" issues such as ownership, obstruction of views, impacts of roots crossing boundaries, nuisance problems, disease or insect quarantines, and safety of nearby trees or plants that may be affected.[citation needed]
Arborists are frequently consulted to establish the factual basis of disputes involving trees, or by private property owners seeking to avoid legal liability through the duty of care.[12] Arborists may be asked to assess the value of a tree[13] in the process of an insurance claim for trees damaged or destroyed,[14] or to recover damages resulting from tree theft or vandalism.[15] In cities with tree preservation orders an arborist's evaluation of tree hazard may be required before a property owner may remove a tree, or to assure the protection of trees in development plans and during construction operations. Carrying out work on protected trees and hedges is illegal without express permission from local authorities,[16] and can result in legal action including fines.[17] Homeowners who have entered into contracts with a Homeowner's association (see also Restrictive covenants) may need an arborists' professional opinion of a hazardous condition prior to removing a tree, or may be obligated to assure the protection of the views of neighboring properties prior to planting a tree or in the course of pruning.[18] Arborists may be consulted in forensic investigations where the evidence of a crime can be determined within the growth rings of a tree, for example. Arborists may be engaged by one member of a dispute in order to identify factual information about trees useful to that member of the dispute, or they can be engaged as an expert witness providing unbiased scientific knowledge in a court case. Homeowners associations seeking to write restrictive covenants, or legislative bodies seeking to write laws involving trees, may seek the counsel of arborists in order to avoid future difficulties.[19]
Before undertaking works in the UK, arborists have a legal responsibility to survey trees for wildlife, especially bats, which are given particular legal protection. In addition, any tree in the UK can be covered by a tree preservation order and it is illegal to conduct any work on a tree, including deadwooding or pruning, before permission has been sought from the local council.[citation needed]
The protagonist in Italo Calvino's novel The Baron in the Trees lives life on the ground as a boy and spends the rest of his life swinging from tree to tree in the Italian countryside. As a young man he helps the local fruit farmers by pruning their trees.[citation needed]
Some noteworthy arborists include:
Tree care is the application of arboricultural methods like pruning, trimming, and felling/thinning[1] in built environments. Road verge, greenways, backyard and park woody vegetation are at the center of attention for the tree care industry. Landscape architecture and urban forestry[2][3] also set high demands on professional tree care. High safety standards against the dangers of tree care have helped the industry evolve. Especially felling in space-limited environments poses significant risks: the vicinity of power or telephone lines, insufficient protective gear (against falling dead wood, chainsaw wounds, etc.) and narrow felling zones with endangered nearby buildings, parking cars, etc. The required equipment and experience usually transcends private means and is often considered too costly as a permanent part of the public infrastructure. In singular cases, traditional tools like handsaws may suffice, but large-scale tree care usually calls for heavy machinery like cranes, bucket trucks, harvesters, and woodchippers.
Road side trees are especially prone to abiotic stress by exhaust fumes, toxic road debris, soil compaction, and drought which makes them susceptible to fungal infections and various plant pests[4] like the spotted lantern fly.[5] When tree removal is not an option, because of road ecology considerations, the main challenge is to achieve road safety (visibility of road signs, blockage-free lanes, etc.) while maintaining tree health.
While the perceived risk of death by falling trees (a part of the "tree risk" complex) is influenced by media and often hyped (the objective risk has been reported to be close to 1 : 10.000.000, almost as low as death by lightning),[6] singular events have encouraged a "proactive" stance so that even lightly damaged trees are likely to be removed in urban and public traffic surroundings.[3] As a tree ages and nears the end of its safe useful life expectancy (SULE),[7] its perceived amenity value is decreased greatly. A risk assessment normally carried out by local council's arborist to determine the best course of action.[8] As with all public green spaces, trees in green urban spaces and their careful conservation is sometimes in conflict with aggressive urban development even though it is often understood how urban trees contribute to liveability of suburbs and cities both objectively (reduction of urban heat island effect, etc.) and subjectively.[9][10][11][12] Tree planting programs implemented by a growing number of cities, local councils and organizations is mitigating the losses and in most cases increasing the number of trees in suburbia.[13] Programs include the planting of 2 trees for every 1 tree removed, while some councils are paying land owners to keep trees instead of removing them for farming or construction.[14]
The voluntary industry consensus standards developed by TCIA, resulted in the ANSI A300 standard, the generally accepted industry standard for tree care practices including trees, shrubs, and other woody plants.[15] It includes the following parts:
Urban Forestry maintains 4.1 million trees on public property, which includes an estimated 3.5 million trees within Toronto's parks and ravines, and approximately 600,000 trees on City streets. ... The focus of our maintenance service is shifting progressively from reactive maintenance to proactive maintenance.
cite web
Ho Chi Minh City has announced a plan to move and cut down 300 trees on Ton Duc Thang Street in District 1 to make space for a bridge connecting to District 2 and a metro station.
Arboriculture (/ˈɑËÂÂÂrbÉ™rɪˌkÊŒltʃər, É‘ËÂÂÂrˈbÉâ€ÂÂËÂÂÂr-/, from Latin: arboris + culture)[1] is the cultivation, management, and study of individual trees, shrubs, vines, and other perennial woody plants. The science of arboriculture studies how these plants grow and respond to cultural practices and to their environment. The practice of arboriculture includes cultural techniques such as selection, planting, training, fertilization, pest and pathogen control, pruning, shaping, and removal.
A person who practices or studies arboriculture can be termed an arborist or an arboriculturist. A tree surgeon is more typically someone who is trained in the physical maintenance and manipulation of trees and therefore more a part of the arboriculture process rather than an arborist. Risk management, legal issues, and aesthetic considerations have come to play prominent roles in the practice of arboriculture. Businesses often need to hire arboriculturists to complete "tree hazard surveys" and generally manage the trees on-site to fulfill occupational safety and health obligations.[citation needed]
Arboriculture is primarily focused on individual woody plants and trees maintained for permanent landscape and amenity purposes, usually in gardens, parks or other populated settings, by arborists, for the enjoyment, protection, and benefit of people.[citation needed]
Arboricultural matters are also considered to be within the practice of urban forestry yet the clear and separate divisions are not distinct or discreet.[citation needed]
Tree benefits are the economic, ecological, social and aesthetic use, function purpose, or services of a tree (or group of trees), in its situational context in the landscape.
A tree defect is any feature, condition, or deformity of a tree that indicates weak structure or instability that could contribute to tree failure.
Common types of tree defects:
Codominant stems: two or more stems that grow upward from a single point of origin and compete with one another.
Included bark: bark is incorporated in the joint between two limbs, creating a weak attachment
Dead, diseased, or broken branches:
Cracks
Cavity and hollows: sunken or open areas wherein a tree has suffered injury followed by decay. Further indications include: fungal fruiting structures, insect or animal nests.
Lean: a lean of more than 40% from vertical presents a risk of tree failure
Taper: change in diameter over the length of trunks branches and roots
Epicormic branches (water sprouts in canopy or suckers from root system): often grow in response to major damage or excessive pruning
Roots:
Proper tree installation ensures the long-term viability of the tree and reduces the risk of tree failure.
Quality nursery stock must be used. There must be no visible damage or sign of disease. Ideally the tree should have good crown structure. A healthy root ball should not have circling roots and new fibrous roots should be present at the soil perimeter. Girdling or circling roots should be pruned out. Excess soil above the root flare should be removed immediately, since it presents a risk of disease ingress into the trunk.
Appropriate time of year to plant: generally fall or early spring in temperate regions of the northern hemisphere.
Planting hole: the planting hole should be 3 times the width of the root ball. The hole should be dug deep enough that when the root ball is placed on the substrate, the root flare is 3–5cm above the surrounding soil grade. If soil is left against the trunk, it may lead to bark, cambium and wood decay. Angular sides to the planting hole will encourage roots to grow radially from the trunk, rather than circling the planting hole. In urban settings, soil preparation may include the use of:
Tree wells: a zone of mulch can be installed around the tree trunk to: limit root zone competition (from turf or weeds), reduce soil compaction, improve soil structure, conserve moisture, and keep lawn equipment at a distance. No more than 5–10cm of mulch should be used to avoid suffocating the roots. Mulch must be kept approximately 20cm from the trunk to avoid burying the root flare. With city trees additional tree well preparation includes:
Tree grates/grill and frames: limit compaction on root zone and mechanical damage to roots and trunk
Root barriers: forces roots to grow down under surface asphalt/concrete/pavers to limit infrastructure damage from roots
Staking: newly planted, immature trees should be staked for one growing season to allow for the root system to establish. Staking for longer than one season should only be considered in situations where the root system has failed to establish sufficient structural support. Guy wires can be used for larger, newly planted trees. Care must be used to avoid stem girdling from the support system ties.
Irrigation: irrigation infrastructure may be installed to ensure a regular water supply throughout the lifetime of the tree. Wicking beds are an underground reservoir from which water is wicked into soil. Watering bags may be temporarily installed around tree stakes to provide water until the root system becomes established. Permeable paving allows for water infiltration in paved urban settings, such as parks and walkways.
Within the United Kingdom trees are considered as a material consideration within the town planning system and may be conserved as amenity landscape[3] features.
The role of the Arborist or Local Government Arboricultural Officer is likely to have a great effect on such matters. Identification of trees of high quality which may have extensive longevity is a key element in the preservation of trees.
Urban and rural trees may benefit from statutory protection under the Town and Country Planning[4] system. Such protection can result in the conservation and improvement of the urban forest as well as rural settlements.
Historically the profession divides into the operational and professional areas. These might be further subdivided into the private and public sectors. The profession is broadly considered as having one trade body known as the Arboricultural Association, although the Institute of Chartered Foresters offers a route for professional recognition and chartered arboriculturist status.
The qualifications associated with the industry range from vocational to Doctorate. Arboriculture is a comparatively young industry.
I called five different companies in the area, Rudy is the only one that not only answered but was able to come out and give an estimate and complete our project.
I had a great experience with Rudy and his crew from All In Tree Service. They came out to trim some overgrown trees on our property, and the results were amazing. They were punctual and professional, and they cleaned up all the debris afterward. I’ll definitely be calling them again!
Rudy and his team were lifesavers! We had a large pine tree dangerously close to our house, and All In Tree Service took care of it with ease. They worked quickly and safely, and the price was very reasonable. Highly recommend!
Can always count on their services! Quick to respond and provide high quality work for a fair price. Used them multiple times and will continue to give them my business for any more tree work
These guys were incredible! Israel and his crew showed up in the morning working like a well oiled machine. They removed 16 pines, ground 9 stumps and trimmed a couple hardwoods. By the end of the day two full truck loads of logs and at least three truckloads of chips were GONE! They raked and blew off everything before they left. My wife and I were amazed to watch them work. We highly recommend them and will use them again!